HEIGHT: |
69 feet clear height, singles
tubing, doubles rods |
RATING: |
Maximum rated static hook load per API std 4E |
|
150,000 pounds with 4 lines strung
|
COLUMN LEGS: |
2" x 6" x 3/16" wall Hi-tensile
tubing |
BRACES: |
1 1/2" x 3" x 1/8" wall Hi-tensile
tubing |
BASE SECTION: |
4-leg model (2 legs to ground, 2 legs to rear of rig) |
|
Turbuckle tilting with 3" screw in legs to
ground |
TUBING BOARD: |
Capacity 12,000 feet of 2" tubing
|
|
Fingers for end racking and adjustable for any size
tubing |
|
Mounts at 26 feet above ground level with
"V" door on both sides |
ROD BOARD: |
2 - No. 104 rod hangers with combined capacity of
208 stands of 3/4" rods |
|
With adapter sleeves furnished will handle 5/8"
, 3/4", 7/8" and 1" sucker rods |
|
Includes rodman basket, air cylinder transfer system
and safety sub-elevators |
|
Rod board goes into position when activated by
hydraulic cylinder. Controls and wire rope system for raising and lowering tubing board
and rod board are furnished. |
|
Mounted at 53 feet for doubles rods |
HYDRAULICS: |
Raising cylinder - chrome plated |
|
Controls Valves for raising derrick and positioning
rod and tubing board |
|
Operates off rig hydraulic system |
|
Positioning cylinder - rod board and tubing board |
CROWN: |
For 4 line string up of conventional block flat with
derrick |
|
4 - 24" Timken bearing sheaves - hardened
grooves |
|
2 - 24" Single sheaves in line |
|
1 - 24" Single sheave cross-mounted |
|
1 - 24" Sandline sheave |
|
2 - Catline sheaves |
WIRE ROPE: |
2 - Load guys with tail chain and tightening binder |
PRIMER COAT: |
Briner Inorganic Zinc |
TOP COAT: |
Dupont 55769U Imron White (polyurethane) |
WEIGHT: |
10,000# est. |