|
HEIGHT: |
96 feet clear
height, double tubing, triple rods |
|
RATING: |
Maximum rated
static hook load |
|
|
220,000 pounds with
4 lines strung |
|
|
250,000 pounds with
6 lines strung |
|
|
265,000 pounds with
8 lines strung |
|
COLUMN LEGS: |
3" x 6" x 1/4" wall
Hi-tensile tubing |
|
BRACES: |
1 1/2" x 3" x 1/8" wall Hi-tensile tubing |
|
BASE SECTION: |
4-Leg Model (2 legs
to ground, 2 legs to rear of rig) |
|
|
Turnbuckle tilting with 3 1/2" screws in legs to ground |
|
TUBING BOARD: |
Capacity 27,000 feet 2 7/8" tubing |
|
|
Fingers for end
racking & adjustable for any size tubing |
|
|
Mounts at 55 feet
above ground level |
|
HYDRAULICS: |
Scoping ram &
push-pull raising ram - chrome plated |
|
|
Controls for raising, lowering & scoping derrick |
|
|
Operates off rig
hydraulic system |
|
ROD BOARD: |
2-No. 104 Rod
hangers with combined capacity of 208 stands of 3/4" rods.
With adapter sleeves furnished will handle 5/8",
3/4", 7/8"
& 1" sucker rods. |
|
|
Includes rodman
basket, air cylinder transfer system and safety sub-elevators. |
|
|
Rod equipment goes
into position when derrick is scoped up or down. |
|
|
Mounted at 78 feet
for triple rods |
|
CROWN: |
For 4, 6 or 8 line string up of conventional block flat with
derrick |
|
|
1-30" & 5-24"
Timken bearing sheaves-hardened grooves |
|
|
1-30" & 1-24"
Single sheaves in line |
|
|
1-24" Triple sheave
cross-mounted |
|
|
1-24" Sandline
sheave |
|
|
2-Catline sheaves |
|
DERRICK LOCKS: |
Top section of
derrick locks to bottom section when four load pins extend
activated by two springs.
Load pins are released manually with lever at
operator's position when telescoping up or down. |
|
WIRE ROPE: |
2-Load guys with
tail chain & tightening binder |
|
PRIMER COAT: |
Briner Inorganic
Zinc |
|
TOP COAT: |
Dupont
Imron or PPG Del Fleet |
|
WEIGHT: |
18,300# est. |