|
HEIGHT: |
88
feet clear height, double tubing, triple rods |
|
RATING: |
Maximum rated static hook load |
|
150,000 pounds with 4 lines strung |
|
COLUMN LEGS: |
2" x
6" x 3/16" wall Hi-tensile tubing |
|
BRACES: |
1
1/2" x 3" x 1/8" wall Hi-tensile tubing |
|
BASE SECTION: |
4-leg model (2 legs to ground, 2 legs to rear of rig) |
|
Turnbuckle tilting with 3" screw in legs to ground |
|
TUBING BOARD: |
Capacity 14,100 feet of 2 7/8" tubing |
|
Fingers for end racking and adjustable for any size tubing |
|
Board raises and lowers automatically with lines in tension
at all times |
|
Mounts at 53 feet for double rods |
|
ROD BOARD: |
2 -
No. 104 rod hangers with combined capacity of 208 stands of
3/4" rods with adapter sleeves |
|
|
furnished will handle 5/8" , 3/4", 7/8" and 1" sucker rods |
|
|
Includes rodman basket, air cylinder transfer system and
safety sub-elevators |
|
|
Rod
equipment goes into position when derrick is scoped up or
down |
|
|
Mounted at 53 feet for triple rods |
|
|
Installed in new derrick |
|
HYDRAULICS: |
Scoping Ram & push-pull raising ram- chrome plated |
|
Controls for raising, lowering and scoping derrick |
|
Operates off rig hydraulic system |
|
CROWN: |
For
4 or 6 line string up of conventional block flat with
derrick |
|
4 -
24" Timken bearing sheaves in line - hardened grooves |
|
2 -
Single sheaves in line - 24" fastline sheave |
|
1 -
Sandline sheaves |
|
2 -
Catline sheaves |
|
DERRICK LOCKS: |
Top
section of derrick locks to bottom section when four load
pins extend activated by two springs. Load pins are
released manually with lever at operator's position when
telescoping up or down |
|
WIRE ROPE: |
2 -
Load guys with tail chain and tightening binder |
|
PRIMER COAT: |
Briner Inorganic Zinc. |
|
TOP COAT: |
Dupont
Imron or PPG Del Fleet |
|
WEIGHT: |
12,800# est |