|
HEIGHT: |
69 feet
clear height, single tubing, double rods |
|
RATING: |
Maximum rated static hook load |
|
|
100,000 pounds with 4 lines strung
|
|
COLUMN LEGS: |
2" x 4" x 3/16" wall Hi-tensile tubing |
|
BRACES:
|
1 1/2" x 1 1/2 x 1/8" wall Hi-tensile
tubing |
|
BASE SECTION:
|
"V" Type base section hinging to rear of unit |
|
|
Turnbuckle tilting |
|
TUBING BOARD:
|
Capacity 10,000 feet of 2" tubing
|
|
|
Fingers for end racking and adjustable for
any size tubing |
|
|
Board raises and lowers automatically
with lines in tension at all times |
|
|
Mounts at 26 feet above ground level with
"V" door |
|
ROD BOARD: |
2 - No. 104 rod hangers with combined
capacity of 208 stands of 3/4" rods with adapter
sleeves |
|
|
furnished will handle
5/8" , 3/4", 7/8" and 1" sucker rods |
|
|
Includes rodman basket,
air cylinder transfer system and safety sub-elevators |
|
|
Rod equipment goes into position when
derrick is scoped up or down |
|
|
Mounted at 53 feet for double rods |
|
HYDRAULICS:
|
Scoping Ram &
push-pull raising ram- chrome plated |
|
|
Controls for raising, lowering and scoping
derrick |
|
|
Operates off rig hydraulic system |
|
CROWN:
|
For 4 line string up of conventional block
flat with derrick |
|
|
1 - 20" and 3 - 24" Timken bearing sheaves -
hardened grooves |
|
|
2 - 24" Single sheaves in line |
|
|
1 - 20" Single sheave cross-mounted |
|
|
1 - 24" Sandline
sheaves |
|
|
2 - Catline sheaves |
|
DERRICK LOCKS: |
Top section of
derrick locks to bottom section when four load pins extend
activated by two springs. Load pins are released
manually with lever at operator's position when telescoping
up or down |
|
WIRE ROPE:
|
2 - Load guys with tail chain and
tightening binder |
|
PRIMER COAT:
|
Briner Inorganic Zinc. |
|
TOP COAT:
|
Dupont
Imron or PPG Del Fleet |
|
WEIGHT:
|
8,600# est. |