|
HEIGHT: |
114 feet clear
height |
|
RATING: |
Maximum rated static
hook load |
|
|
325,000 pounds with
6 lines strung |
|
|
350,000 pounds with
8 lines strung |
|
COLUMN LEGS: |
3" x 7" x 3/8" wall
Hi-tensile tubing |
|
BRACES: |
2" x 3" x 1/8" wall Hi-tensile tubing |
|
BASE SECTION: |
4-Leg Model (2 legs
to ground, 2 legs to rear of rig) |
|
|
Turnbuckle tilting with 4" screws in legs to ground |
|
TUBING BOARD: |
Capacity 10,000 feet 4 1/2" tubing |
|
|
Fingers for end
racking & adjustable for any size tubing |
|
|
Board raises &
lowers automatically with lines in tension at all times |
|
|
Mounts at 58, 65 or
73 feet above ground level |
|
HYDRAULICS: |
Scoping ram & 2
push-pull raising rams - chrome plated |
|
|
Controls for raising, lowering & scoping derrick |
|
|
Operates off rig
hydraulic system |
|
CROWN: |
1-36" & 4-30" Timken
bearing sheaves-hardened grooves |
|
|
1-36" & 1-30" Single
sheaves in line for 1 1/8" W.L. |
|
|
1-30" Triple sheave
cross-mounted for 1 1/8" W.L. |
|
|
1-24" Sandline
sheave for 9/16" or 5/8" W.L. |
|
|
1-12" Catline
sheaves |
|
DERRICK LOCKS: |
Top section of
derrick locks to bottom section when four load pins extend
activated by two springs.
Load pins are released manually with lever at
operator's position when telescoping up or down. |
|
WIRE ROPE: |
2-Load guys with
tail chain & tightening binder |
|
PRIMER COAT: |
Briner Inorganic
Zinc |
|
TOP COAT: |
Dupont
Imron or PPG Del Fleet |
|
WEIGHT: |
30,000# est. |