Office (432) 366-2895
Fax (432) 366-1264
Toll-Free (800) 657-8919


Model 104-225-C Pemco Derrick

HEIGHT: 104 feet clear height, double tubing
RATING: Maximum rated static hook load
225,000 pounds with 6 lines strung
240,000 pounds with 8 lines strung
COLUMN LEGS: 3" x 6" x 1/4" wall Hi-tensile tubing
BRACES: 1 1/2" x 3" x 1/8" wall Hi-tensile tubing 
BASE SECTION: 4-Leg Model (2 legs to ground, 2 legs to rear of rig)
Turnbuckle tilting with 3 1/2" screws in legs to ground 
TUBING BOARD: Capacity 27,000 feet 2 7/8" tubing 
Fingers for end racking & adjustable for any size tubing
Mounts at 55 & 67 feet above ground level
HYDRAULICS: Scoping ram & 2 push-pull raising rams - chrome plated
Controls for raising, lowering & scoping derrick 
Operates off rig hydraulic system
ROD BOARD: 2-No. 104 Rod hangers with combined capacity of 208 stands of 3/4" rods.  With adapter sleeves furnished will handle 5/8", 3/4", 7/8" & 1" sucker rods.
Includes rodman basket, air cylinder transfer system and safety sub-elevators.
Rod equipment goes into position when derrick is scoped up or down.
Mounted at 78 feet for triple rods
CROWN: For 6 or 8 line string up of conventional block flat with derrick 
1-30" & 5-24" Timken bearing sheaves-hardened grooves
1-30" & 1-24" Single sheaves in line
1-24" Triple sheave cross-mounted
1-24" Sandline sheave
2-Catline sheaves
DERRICK LOCKS: Top section of derrick locks to bottom section when four load pins extend activated by two springs.  Load pins are released manually with lever at operator's position when telescoping up or down.
WIRE ROPE: 2-Load guys with tail chain & tightening binder
PRIMER COAT: Briner Inorganic Zinc
TOP COAT: Dupont Imron or PPG Del Fleet
WEIGHT: 19,700# est.